Sold By All Machine Tools 702.400.3460

14" DynaPath Flat Bed CNC Lathe, "there's nothing like it!"
 


 
Features:
  • Full power at low spindle speed
  • Large diameter precision ball screws and nut assemblies on X and Z axis-with metal covers
  • T-slotted compound for easy mounting of optional tool posts
  • May be used as a conventional (manual ) lathe utilizing dual handwheels or as a full feature two axis CNC
  • Centralized automatic slideway lubrication system
  • Coolant system
  • Easy chip removal through a front access chip pan on wheels
  • Full sheet metal enclosure to keep coolant and chips off the floor
  • 14.17" is the swing over the bed
  • Distance between centers is 35"
  • Spindle speed - manual change is 2 step - L 25~480 rpm, H 481~3,000 rpm
  • 7.5 HP main spindle motor
 
Specifications
FEATURE FB-14
Swing Over Bed 14.17"
Swing Over Cross Slide 7.08"
Distance Between Centers 35"
Width of Bed 10.236"
Spindle Nose, Internal Taper STD.D1-6 OPT. A1-6, MT. No.6
Spindle Center Sleeve MT. No.6 x MT. No.4
Spindle Bore 2.066"
Spindle Speed: Gear Steps/Range STD. Manual change 2 steps / L 25~480 R.P.M.
OPT. Pneumatic change H 481~3000 R.P.M
Longitudinal Travel (Z-axis) 34"
Cross Slide Travel (X-axis) 8.07"
AC Servomotor (X-axis) 0.45KW 2.84 N.m
AC Servomotor (Z-axis) 0.85KW 5.39 N.m
Dia. of Ball Screw (X-axis) Ø0.787" P5 C5
Dia. of Ball Screw (Z-axis) Ø1.259" P10 C5
Rapid Traverse Speed (X-axis) 5 m/min(196.8 ipm)
Rapid Traverse Speed (Z-axis) 7.5 m/min(295.3 ipm)
Tool Station STD. Manual 4 way tool post
Size of External Turning Tool □20mm
Boring Bar Diameter Ø0.787"
Quill Diameter Ø2.283"
Quill Travel 5.5"
Taper of Center MT.No.4
Main Spindle Motor AC 3.7KW (5HP) + Inverter(7.5HP)
Hydraulic Oil Pump OPT. 0.75KW(1HP)
Forced Lubrication for Headstock 1/4HP
Coolant Pump 1/6HP
Hydraulic Tank OPT. 6.6 gal (30 Litre)
Coolant Tank 11 gal.(50L)
Weight (Net / Gross) Approx. 4,400 Lbs/5,500 Lbs
Packing sizes  Length x Width x Height

Length 90.81" x Width 74.41" x Height 87.8"
  • Actual working stroke may be reduced by work holding equipment and chuck guards.
  • Specifications are subject to change without prior notice.