Call 702.400.3460
 Lux Precision Engine Lathes
LUX-1340G | LUX-1440G | LUX-1640G/1660G
 LUX-1440VS | LUX-1640VS/1660VS
 LUX-1640T/1660T
 
  Swing over bed 13"
Between centers 40".
  D1-4 with 1 9/16" Spindle bore.
  Spindle speed 16 steps, 42-2000RPM
  Width of bed: 8"
Headstock gears are hardened and ground.
  Headstock gears are made of SCM 21 (Cr-mo alloy steel).
  3HP 3Ø main motor. Wire 220V,1Ø motor available.
Stand with chip tray 7 break.
The bed ways are Meehanite cast iron.
  Made in Taiwan
   
 
 
Swing over bed 14"
Between centers 40"
D1-4 with 1 9/16" spindle bore.
width of bed 10"
  Spindle speed 16 steps, from 42-2000 RPM
  Headstock gears are hardened and ground .
  Headstock gears are made of SCM21. (Cr-mo alloy steel ) respectively.
  3HP 3Ø main motor, 220V, 1Ø motor available.
  One piece cast iron stand with foot break.
  Made in Taiwan
   
 
Swing over bed 16"
Between centers 40"/60"
D1-6 with 2 1/8 " spindle bore
  Width of bed 11"
  Spindle speed 12 steps, from 50-1800 RPM
  Hardened and ground headstock gears and bedways.
  Hardened and ground saddle way and top slide way.
One shot lube for Apron and carriage.
  Automatic lube for headstock gears and bearings.
5 HP main motor
One piece cast iron stand with foot brake.
Bedways made of Meehanite cast iron.
  3 point bearings-two taper roller/ one ball bearing.
  Universal gear box without change gear, gears made of alloy steel, All hardened.
  Made in Taiwan
   
 
Swing over bed 14"
Between centers 40"
D1-4 WITH 1 9/16" SPINDLE BORE.
WIDTH OF BED 10"
Bed ways made of Meehanite cast iron.
  Variable speed, from 30-2500 RPM
  Headstock gears and saddle way are hardened and ground.
  Headstock gears are made of SCM21(Cr-mo Alloy Steel) Respectively.
  3 HP main inverter motor.
  3 HP inverter( Japanese YASKAWA PC3).
  One piece cast iron stand with foot brake.
  Made in Taiwan
   
 
Swing over bed 16"
Between centers 40/60"
D1-6 with 2 1/8 " Spindle bore.
  Width of bed 11"
  Hardened and ground headstock gears & bedways.
  Hardened and ground saddleway and top slide way.
  One shot lube for Apron and carriage.
  Automatic lube headstock gears and bearings.
  5 HP main inverter motor.
  7 1/2 HP inverter(Yaskawa P5)
  One piece cast iron stand with foot break.
  3 points bearings two taper roller one ball bearing.
  Universal gearbox without change gear.
  Gears made by alloy steel are hardened.
  Made in Taiwan
 
 
Swing over bed: 16"
Between centers 40/60"
D1-6 with 2 " spindle bore.
Width of bed 10 3/16".
  The bed ways made of meehanite(M) cast iron.
  Hardened and ground headstock gears& bedways.
  Hardened and ground saddleway and top slide way.
Spindle taper bearing #30214, #30215
  The spindle speed, 12 steps from 26 to 2000 RPM.
  Directional feed of the carriage is controlled by a handy push/pull knob on the Apron. 5HP main motor wire 220V,3Ø
One piece cast iron stand with rapid barke.
  Universal gear box without change gear, gears made of alloy steel hardened.
  Made in Taiwan
   
 

 

 

 

 

 

 

Counter by Free-Stats.com